Fujitsu PA03541-B005 - ScanSnap S300, Operator'S Manual

Page: 84 / 236

64
■
Set a password for PDF file
You can set a password for a PDF file created after scanning. It becomes impossible
to open a password-protected file if you do not enter the password for that file.
The [Enter password] dialog box appears whenever the scanning finishes. Enter a
password two times (one is for confirmation), and then click the [OK] button.
*If you click the [Cancel] button, the file is saved as a normal PDF file without a
password.
Use a fixed password
You can set a fixed password in advance for all the PDF files so that the [Enter
password] dialog box will not appear when you scan.
If you select the checkbox, the [Password] and the [Confirm] fields become
enabled. Enter the same password in these two fields.
ATTENTION
•
You can set a password using the following:
Maximum number of characters: 16
Characters: A-Z, a-z, 0-9
Symbols: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
* Note: If you forget your password, the PDF file cannot be opened.