MB91F465XA EMULATION
Chapter 2 Hardware Setup
© Fujitsu Microelectronics Europe GmbH
- 7 -
MCU-AN-300015-E-V11
2 Hardware Setup
The chapter describes the setup of the Emulation system
2.1 Required
parts
To Emulate the MB91F456XA series following parts are required:
1.
MB2198-01 Emulator Main Unit
2.
MB2198-10: DSU4 cable
3.
EMA-MB91V460A-00x:
Adapter board, including MB91V460A
4.
EMA-MB91V460A-100:
FlexRay extension board, including MB88121B
5.
EMA-MB91F465X-NLS-100M20:
Socket adapter board
6.
NQPack100SD-ND:
Socket
for
package
FPT-100P-M20
On the target system a NQPack100SD-ND socket is required enabling connection to EMA-
MB91F465X-NLS-100M20 board.
Figure 2-1: Hardware Parts
1
3
5
4
2
