Fujitsu M3093DG, Instruction Manual

Page: 171 / 208

A.2 Paper Conditions
A.2.1 Paper type
f Woodfree paper
f PPC paper; Specified by XEROX Corporation
When using another paper, check that it is successfully fed by ADF before
performing a scanning operation.
A.2.2 Paper weight
13.9 lbs (52 g/m
2
) to 27.8 lbs (104 g/m
2
)
A.2.3 Items to avoid
f The following documents may be hard to read by ADF.
Before you start the large quantity reading, check that the document is read
appropriately. If the reading is not appropriate, read them by flatbed.
>
Paper with a clip or staple
>
Paper that has ink which is not dry.
>
Paper thickness is not constant, such as an envelope.
>
Paper that has large rumples or curl. (See NOTE.)
>
Paper that has folds or tears.
>
Tracing paper
>
Coating paper
>
Carbon paper.
>
Paper size that is out of standard.
>
Items other than paper, such as clothes, metal sheet, or OHP film.
>
Photographic paper
>
Paper that has perforations on its side.
>
Paper that has a shape other than square.
>
Paper that is very thin.
Note:
The important document which shall not be torn must be read by flatbed.
A $ 3