Fujitsu M3093DG, Instruction Manual

Page: 68 / 208

- Function: Byte 1C
Selects functions from the table below. This scanner returns X'0E' or X'0F'.
Byte Bit Description
1C Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Data overflow
This bit is set to 1 for an image scanner in which an overflow can occur.
The bit is set to 0 for an image scanner in which an overflow does not
occur.
Monochrome function (black and white)
This bit is set to 1 if the image scanner has the monochrome (black and
white) function. The bit is set to 0 if the image scanner does not have this
function.
Dither and half
>
tones
This bit is set to 1 if the image scanner has the dithering and halftones
functions. The bit is set to 0 if the image scanner does not have these
functions.
Multilevel (gray scale)
This bit is set to 1 if the image scanner has the multilevel (gray scale)
function. The bit is set to 0 if the image scanner does not have this
function.
Reserved (Bits 4 to 7 are reserved for JBMS)
Monochrome (RGB color)
This bit is set to 1 if the image scanner has the monochrome (black and
white) function. The bit is set to 0 if the image scanner does not have this
function.
Dithering and halftones (RGB color)
This bit is set to 1 if the image scanner has the dithering and halftones
functions. The bit is set to 0 if the image scanner does not have these
functions.
Multilevel (RGB color)
This bit is set to 1 if the image scanner has the multilevel (RGB color)
function. The bit is set to 0 if the image scanner does not have this
function.
4 $ 36