Fujitsu M3093DG, Instruction Manual

Page: 154 / 208

4.7.2 Command sequence to read
The following illustration is an example of the command sequence used with this
scanner. All commands are assumed to be issued from a single initiator.
(1) Normal sequence
Target Initiator
RESERVE UNIT Move to reserved status
Example: Set up window 0 (front
>
side) and window 128
(back
>
side).
Declare subwindows 0
and 1 in both front
>
side
and back
>
side
subwindow list
(M3093DE)
SET WINDOW $ Set window parameters
$ Calculate the number of scan lines covering
all windows set up, in terms of lines effective
after magnification change
Document
a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Window 0 (front
>
side)
SET SUBWINDOW Set subwindow parameters
Document
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a
Window 128 (back
>
side)
4 $ 122