Fujitsu LIFEBOOK U728 Operating Manual Download

Page: 29 / 119

Working with the notebook

Display

Description

Power-on indicator/Standby

Standbyindicator

Power-onindicator

•

The indicator is illuminated: The notebook is switched on.

•

The indicator

ashes: The notebook is in standby mode.

•

Indicator is off: The notebook is switched off.

Battery charging indicator/AC connection

The battery charging level is shown by the rechargeable battery indicator.

•

The indicator lights up white: The rechargeable battery is charged or no
rechargeable battery is inserted.

•

The indicator light is orange: The AC adapter is connected and the battery
is being charged.

•

The indicator is

ashing orange: The AC adapter is connected but the battery

cannot be charged as the battery is too hot or too cold for charging. The
charging process is continued as soon as the rechargeable battery has reached
a permissible temperature again.

•

The indicator is

ashing red: A fault has occurred.

•

The indicator is not lit up: The AC adapter is not connected.

Batterystatusindicator

Batterysymbol

Batteryindicator

Battery indicator

•

The indicator lights up white: The rechargeable battery is charged to between
51% and 100% of its maximum capacity.

•

The indicator light is orange: The rechargeable battery is charged to between
13% and 50% of its maximum capacity.

•

The indicator lights up red: The rechargeable battery is charged to between
0% and 12% of its maximum capacity.

•

The indicator is

ashing red: A fault has occurred.

Drive indicator

Drive

Indicator

The indicator is illuminated: The hard disk drive is being accessed.

Wireless indicator

•

The indicator is illuminated: The wireless components are switched on.

•

Indicator is off: The wireless components are switched off.

F Lock indicator

Indicator

FLock

The indicator is illuminated: The key combination

(ESC) has been

pressed. Instead of the key combination

+ hot key, the hot key functions can be

executed by pressing the keys directly (see chapter

"F Lock settings", Page 35

Num Lock indicator

Indicator

NumLock

The indicator is illuminated: The

Num Lock

key has been pressed. The virtual

number keys have been switched on. You can output the characters indicated
on the upper right of the keys.

Fujitsu

Summary of Contents for LIFEBOOK U728
























































































































Search results

Summary of Contents for LIFEBOOK U728

Reviews:

Related manuals for LIFEBOOK U728

Brands by name

Popular brands

Fujitsu LIFEBOOK U728, Operating Manual

Search results

Summary of Contents for LIFEBOOK U728

Reviews:

Related manuals for LIFEBOOK U728

Brands by name

Popular brands