Fujitsu LifeBook T732 Operating Manual Download

Page: 23 / 125

Working with the notebook

Status displays

Description

Power-on indicator

•

Indicator is illuminated: The notebook is switched on.

•

Indicator flashes: The notebook is in sleep mode (Save-to-RAM).

•

The indicator is not illuminated: The notebook is switched off or in
Save-to-Disk mode.

Battery charging indicator

The battery charging indicator shows whether a battery is installed and being
charged.

Battery indicator

This description applies for both batteries.

The battery indicator shows the state of charge of the installed battery.

•

The indicator is lit green: The battery is between 51 % and 100 %
charged.

•

The indicator is lit orange: The battery is between 13 % and 50 %
charged.

•

The indicator is lit red: The battery is between 0 % and 12 % charged.

•

The indicator flashes orange: The battery state of charge is being
checked (for four seconds after battery installation).

•

The indicator flashes red: The battery is faulty.

•

The indicator is not lit: There is no battery installed.

Note: if you use batteries with a capacity of 5800 mAh or 6200 mAh, you can
also check the charge status on the battery itself.

Note: You can also check the state of charge directly at the main battery.

Drive indicator

Indicator is illuminated: The hard disk drive or the CD/DVD in the optical drive
of the notebook is being accessed.

Num Lock indicator

Indicator is lit: The

Num

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper
right of the keys.

Caps Lock indicator

Indicator is lit: The Caps Lock key has been pressed. All letters will be output
as uppercase letters. In the case of keys labelled several times, the character
printed on the upper left of the key will appear when that key is pressed.

Scroll Lock indicator

Indicator is lit: The key combination

Scr

has been pressed. The effect

that this key has varies between applications.

Lock Workstation indicator

The indicator is illuminated: The security functions of the Notebook have
locked your workstation.

Fujitsu

Summary of Contents for LifeBook T732






























































































































Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands

Fujitsu LifeBook T732, Operating Manual

Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands