Fujitsu LifeBook T732 Operating Manual Download

Page: 100 / 125

Troubleshooting and tips

The notebook stops working

Notebook

Energysaving mode

Cause

Troubleshooting

Notebook is in energy saving mode.

►

Leave energy saving mode.

An application programme has caused the
malfunction.

►

Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

►

Connect the mains adapter to the
notebook.

The printer does not print

Printer doesnot print

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The radio connection to a network does not work

Theradioconnectiontoanetwork does not work

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the radio component on (see

"Switching the wireless components on and
off", Page 60

The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

►

Check whether the radio connection is
switched on via the software.

►

Further information on using the radio
component can be found in the help files.

Fujitsu

Summary of Contents for LifeBook T732






























































































































Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands

Fujitsu LifeBook T732, Operating Manual

Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands