Fujitsu LifeBook T732 Operating Manual Download

Page: 111 / 125

- Before Using the Optional Wireless LAN

Before Using the Optional Wireless LAN

This manual describes the procedures required to properly set up and configure the optional integrated Wireless LAN

Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this

manual carefully to ensure its correct operation. Keep this manual in a safe place for future reference.

Wireless LAN Device Covered by this Document

This document is applicable to systems containing one of the following optional devices:

•

Integrated Intel Centrino Advanced-N 6205 (802.11a/b/g/n)

•

Atheros XSPAN 802.11abgn

Characteristics of the WLAN Device

•

The WLAN device is a Mini-PCI card attached to the main board of the mobile computer.

•

The WLAN device operates in license-free RF bands, eliminating the need to procure an FCC operating license.

The WLAN operates in the 2.4GHz Industrial, Scientific, and Medical (ISM) RF band and the lower, middle, and

upper bands of the 5GHz Unlicensed National Information Infrastructure (UNII) bands.

•

The WLAN devices are capable of four operating modes, IEEE802.11a, IEEE802.11b, IEEE802.11g, and

IEEE802.11n

•

The WLAN devices are Wi-Fi certified and operate (as applicable) at a the maximum data rate of 450 Mbps

(theoretical) in IEEE802.11n mode; 54 Mbps in IEEE802.11a or IEEE802.11g mode; and 11 Mbps in

IEEE802.11b mode.

•

The WLAN devices support the following encryption methods - WEP, TKIP, CKIP, and AES encryption.

•

The Wireless LAN devices are compliant with the following standards: WPA, WPA2, CCX1.0, CCX2.0, CCX3.0, and

CCX4.0.

Summary of Contents for LifeBook T732






























































































































Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands

Fujitsu LifeBook T732, Operating Manual

Search results

Summary of Contents for LifeBook T732

Reviews:

Related manuals for LifeBook T732

Brands by name

Popular brands