80
- Memory Upgrade Module
7
Insert the memory upgrade module at a 45° angle. Press the connector edge of the module firmly down and
into the connector until it lodges under the retaining clip. You’ll hear a click when it is properly in place.
8
Replace the cover and reinstall the screw.
Removing a Memory Upgrade Module
1
Perform steps 1 through 4 of Installing a Memory Upgrade Module.
2
Pull the clips sideways away from each side of the memory upgrade module at the same time.
3
While holding the clips out, remove the module by lifting it up and pulling it away from your Tablet PC.
4
Store the memory upgrade module in a static guarded sleeve.
5
Replace the cover and reinstall the screw.
Figure 34. Opening Memory Compartment
Figure 35. Installing a Second Memory Module
Memory Compartment Screw
Retaining Clip
2
1
Alignment Key
T
HE
MEMORY
UPGRADE
MODULE
IS
NOT
SOMETHING
YOU
ROUTINELY
REMOVE
FROM
YOUR
T
ABLET
PC. O
NCE
IT
IS
INSTALLED
,
YOU
CAN
LEAVE
IT
IN
PLACE
UNLESS
YOU
WANT
TO
CHANGE
SYSTEM
MEMORY
CAPACITY
.
Sparrow T580.book Page 80 Thursday, December 2, 2010 2:07 PM
