101
SECTION 4
The power management function is not executed.
Checkpoint
Is Power Savings set to off in
the BIOS setup?
Are you executing a program
that rewrites the screen?
Cause and Solution
Reset the BIOS setup.
If you are executing a program that rewrites the screen even
when no key is pressed, for example a clock display or screen
save, the power management function is not executed.
Message displayed on screen.
See the message list.
The Disk cannot be ejected from the unit.
Checkpoint
Is it in operating mode?
Cause and Solution
Since the disk trays of the CD-ROM/DVD-ROM drive and LS-120
disk drive of this personal computer are electronically locked,
they can be ejected in the operating mode only.
If a disk tray is not ejected for some reason though the personal
computer is in the operating mode, insert the tip of a paper clip
or the like into the pinhole located in the right side of the EJECT
button (for the CD-ROM/DVD-ROM drive) or the pinhole above
the EJECT button (for the LS-120 disk drive) on the right side of
the unit. The disk tray can be ejected by pushing the paper clip
or the like.
If insertion of a paper clip fails in ejection, click any of icons
appearing in the [My computer] window arbitrarily with the right
button and then click [Eject]. The disk tray will be ejected.
Data cannot be read from the CD-ROM drive unit.
Checkpoint
Is the CD-ROM correctly set?
Is there any dirt, condensation
or water on the Disk?
Is the CD-ROM scratched or
extremely warped?
Are you using a non-standard
Disk?
Is the unit installed firmly to
the Multi-bay?
Cause and Solution
Set the Disk correctly with its label facing upwards.
Wipe it from the center outwards with a dry, soft cloth.
Replace the Disk.
Use a CD-ROM which conforms to the standards.
Install the each unit firmly to the Multi-bay.
Bis Sec 4 (97-102)
2/2/00, 11:27
101
