Fujitsu Lifebook E6550 Instructions Manual Download

Page: 35 / 110

SECTION 1

Mounting a multi-bay unit

SECTION 1

7. Multi-bay Unit

This item explains how to mount the multi-bay unit.

Turn off the computer and disconnect
the AC adaptor from it.

Pull out the multi-bay unit release
button.

Remove the multi-bay unit and make sure that
the multi-bay unit release button is pulled out.

Multi-bay
unit release
button

Mount a multi-bay unit.

Push in the unit as far as it will go with its
connector pointing inward.

Multi-bay unit

WARNING

Be sure to turn off your
personal computer and
disconnect the AC adaptor
from it before mounting the
multi-bay unit, otherwise you
might get an electric shock.

Bis Sec 1(22-33)

2/2/00, 11:26

Summary of Contents for Lifebook E6550















































































































Search results

Summary of Contents for Lifebook E6550

Reviews:

Related manuals for Lifebook E6550

Brands by name

Popular brands

Fujitsu Lifebook E6550, Instructions Manual

Search results

Summary of Contents for Lifebook E6550

Reviews:

Related manuals for Lifebook E6550

Brands by name

Popular brands