84
1.3 Security Menu
Setup Item
Supervisor Password Is
User Password Is
Set Supervisor Password
Set User Password
Diskette access
Password on boot
Password on Resume
Selections
Clear
Clear
Enter
Enter
All
Supervisor Only
Disabled
Enabled
Disabled
Enabled
Note (Item Specific Help)
Display the setting of Supervisor password.
Display the setting of User password.
Supervisor Password controls access to the
setup utility.
User password can be set after Supervisor
password is set.
User Password controls access to the system
at boot.
This item can be set with Super visor
password security level. When ‘Supervisor
Only’ is selected, floppy diskette drive is not
available with User password security level.
Controls access to diskette drives.
When Password on boot is ‘Enabled’, the
BIOS requires a password on OS boot.
Enables password entry on boot.
The feature just works at Resume from
Suspend or Save To Disk Mode.
S
S
F1
Help
↑↓
Select Item
-/Space
Change Value
F9
Setup Defaults
ESC
Exit
←→
Select Menu
Enter
Select
:
Sub-Menu
F10
Save and Exit
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power
Boot
Info
Exit
Supervisor Password Is:
Clear
User Password Is:
Clear
Set Supervisor Password
[
Enter
]
Set User Password
[Enter]
Minimum User Password Length [0]
Password on Boot:
[Disabled]
Password on Resume:
[Disabled]
Boot from Removable Media: [All]
Floppy Disk Access:
[All]
:
Hard Disk Security
:
Owner information
Hard Disk Boot Sector:
[Normal]
Item Specific Help
Press <Enter> key to
set Supervisor
Password to enable
any password
features.
Then password entry
is required to enter
BIOS Setup.
Figure 1-11 Security menu
Bis Sec 3 (79-88)
2/2/00, 11:27
84
