18
Using the Closed Cover switch
1
Close the LCD display panel.
This unit goes into suspend mode using the
Closed Cover switch.
Using the Exit Windows dialog box.
1
Click on the START button, then on
Exit Windows.
The Exit Windows dialog box will appear on
the screen.
2
Choose Standby and click on OK.
This computer is suspended.
Critical Point
In battery operation the battery runs out, suspend mode is ended. Save important data to a
floppy disk or the hard disk.
If you start with the internal battery fully charged, suspend mode lasts about one day maximum
with the AC adaptor not connected.
Critical Point
When the BIOS setup “Lid Closure Suspend”
setting is “Disabled”, this unit does not go
into suspend mode even if you close the LCD
display panel.
Bis Sec 1(10-21)
2/2/00, 11:26
18
