manualshive.com logo in svg

Fujitsu Lifebook C352, Manual, Page: 133 / 165

Share
Download
Fujitsu Lifebook C352 Manual Download Page 133

T r o u b l e s h o o t i n g

L i f e B o o k   C   S e r i e s   f r o m   F u j i t s u

127

Problem

Possible Cause

Possible Solution

Six

Power Failures

You turn on your notebook and 

1. The installed battery is completely 

1. When the battery is dead there will be

nothing seems to happen.

discharged, and there is no Power

a beep when the power is turned on 

adapter (AC or auto/airline) installed.

and the notebook will immediately go into 
Dead Battery Suspend mode.

(See page 

28.)

Check the Status Indicator panel to 

determine the presence and condition of
the battery.

(See pages 22-23.)

Install the 

battery if it is not installed or a Power
adapter if all batteries are dead or
unavailable.

(See pages 107-108 and 12-13.)

2. The battery is installed but is 

2. When the battery is dead there will be a

completely discharged and the Power

beep when the power is turned on and 

adapter (AC or auto/airline) is not 

the notebook will immediately go into

plugged in properly.

Dead Battery Suspend mode.

(See page 28.) 

Check the Status Indicator panel to deter
mine the presence and condition of the 
battery and adapter.

(See Figures 3-3 and 

3-4 on pages 22-23.)

Verify that your adapter 

is connected correctly.

(See pages 12-13.)

Summary of Contents for Lifebook C352






































































































































































Reviews:

No comments