Five
U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k C S e r i e s f r o m F u j i t s u
113
C A U T I O N
The memory upgrade module can be
severely damaged by electro-static
discharge (ESD). Be sure you are
properly grounded when handling
and installing the module.
4. Align the memory upgrade module with the
chip side up. Align the connector edge of the
memory upgrade module with the connector
slot in the compartment. The connector will
be pointing toward you. (Figure 5-4.)
5. Insert the memory upgrade module at a
45° angle. (Figure 5-4.) Press the connector
edge of the module firmly down and into
the connector.
6. Press the memory upgrade module down
into the compartment until it lodges under
the retaining clip. You will hear a click when
it is properly in place.
7. Close the keyboard –making sure that the
tabs at the back seat properly into their slots–
until flush with your notebook. (Figure 5-5.)
8. Replace the screws and the keyboard
lock covers.
To Install a Memory Upgrade Module:
1. Shut Down your notebook
(see Power Off on
pages 20-21)
and remove any power adapter
(AC or auto/airline).
2. Open and remove the keyboard lock covers
on both sides of the keyboard, and remove
the screws. (Figure 5-3.)
3. Open the keyboard slowly, using the lift tabs
on either side, which were uncovered in
Step two. (Figure 5-3.)
Figure 5-4 Installing a Memory Upgrade Module
Figure 5-5 Closing the Memory Upgrade Compartment