manualshive.com logo in svg

Fujitsu Lifebook C352, Manual, Page: 104 / 165

Share
Download
Fujitsu Lifebook C352 Manual Download Page 104

S e c t i o n   F o u r

96

S e c t i o n   F o u r

Menu Field

Options

Default

Description

1. Diskette Drive:

–—

–—

The boot selections determine the order in which the BIOS
searches for the operating system during a startup sequence. To
change the order highlight one source by using the up 

Õ

, down 

Ô

cursor keys and then press the 

+

or 

-

key to change the order

number for that source. Be sure to save your changed order when
you exit the BIOS setup utility.

2. Hard Drive:

–—

–—

3. ATAPI CD-ROM Drive:

–—

–—

Table 4-17 Fields, Options and Defaults for the Boot Device Priority 

Exiting from Boot Menu

When you have finished setting the boot
parameters  with the Boot menu, you can
either exit from the setup utility or move to
another menu. If you wish to exit from the
setup utility press the 

Esc

key to go to the Exit

menu. If you wish to move to another menu,
use the cursor keys.

Summary of Contents for Lifebook C352






































































































































































Reviews:

No comments