Fujitsu IP-920 E/DC, Hardware User'S Manual

Page: 49 / 106

Chapter 2 Installation and Connection
IP-920E/DC
35
2.3
Audio and Video Device Connections
2 Digital and 1analog video input connectors are equipped for connecting with video output equipment.
- SDI Video Input (Digital Video)
Connect to SDI IN connector using BNC cable. Input digital HD-SDI or SD-SDI signal.
The signal is terminated with 75Ω impedance.
- HDMI Input (Digital Video)
Connect to HDMI connector on front panel of IP-920E/DC using the HDMI cable.
Input digital signal of HDMI. The signal is terminated with 50 Ω .
- Analog Video Input
Connect to ANALOG VIDEO IN connector using
BNC cable with NTSC or PAL signal.
2 Digital and 1analog audio input connectors are equipped for connecting with audio output equipment.
- Digital Audio Input
SDI Embedded Audio and HDMI audio are supported.
- Analog Audio Input
Connect to ANALOG AUDIO IN connector of IP-920E using the audio adaptor cable.
The figure of cable connections are shown below.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Audio and video output device connections
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
AN
AL
O
G
VID
EO
IN
SD
I
ANALOG AUDIO IN
12 - 24V
E
Audio adapter cable#1
or
Audio adapter cable#3
PUSH
or
PUSH
A- IN R ( )
A
-
IN
(L
)
A- IN L ( )
or
Video & Audio Output Device
2.3
NOTE: