Fujitsu IP-920 E/DC, Hardware User'S Manual, Page: 58 / 106

Chapter 3 Operation Instructions
IP-920E/DC
44
3.2
Device Settings and Operation
■Setup Procedure
The setup procedure is shown below.
See Software User’s Guide for the procedure of the software installation and the each setting.
■Web browser recommended
The recommended web browser is as follow.
- Internet Explorer 6.0 SP2 or later
3.2
Connect IP-920E/DC and PC
using UTP cable
- Check if IP-920E/DC is disconnected to user
’
s network.
- Connect using UTP cable.
- When connect through LAN port, the default IP address and subnet
mask are 10.0.0.1 and 255.0.0.0 respectively. Assign 10.xxx.xxx.xxx for
PC.
(ex. IP address: 10.0.0.2, Subnet mask: 255.0.0.0)
for PC.
For details, please refer to the Software User's Guide.
Turn ON IP-920E/DC
- Execute the Network setting from WEB GUI after the device starts.
For details, please refer to the Software User's Guide.
Change network settings
(Refer the software user
’
s guide)
Connect user
’
s network
Start settings and operations
(Refer the software user
’
s guide)