Fujitsu IP-920 E/DC, Hardware User'S Manual, Page: 50 / 106

Chapter 2 Installation and Connection
IP-920E/DC
36
2.4
Connection to Network
To connect IP-920E/DC to a LAN device, connect the LAN device to the LAN communication port
of IP-920E/DC using a LAN cable (UTP cable). The LAN communication port specification of
IP-920E/DC is 10BASE-T/100BASE-TX.
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Connection to a network
Please do not provision the IP address below.
・
IP address commonly unused
（
0.0.0.0
，
255.255.255.255
，
etc…
）
・
Loop back address (127.xxx.xxx.xxx)
・
Class D and Class E addresses
・
IP address already used
For more information, see IP-920E/DC Software User’s Guide.
RDY
PWR ALM
IN
DWN
OPT
MNT
FG
/ACT
100M
LINK
10/100BASE RS-232C
AN
AL
O
G
VID
EO
IN
SD
I
ANALOG AUDIO IN
12 - 24V
E
Hub, Router, PC, etc.
2.4
CAUTION
NOTE: