¢
Remote controller master/slave setting
NOTE:
Set only one Master remote controller.
1.
To activate the address setting mode, hold down the three buttons of “MENU”, “<“, and “EN-
TER” at the same time for 2 seconds or longer. Menu 2 setting screen is displayed.
2.
Select the “06” in Menu 2 settings. Then press the “ENTER” button.
3.
Select the “0: Master” or the “1: Slave” with the “+” or “-” buttons.
: Master
: Slave
4.
Press the "ENTER" button. If there is no problem, return to Menu 2 items selection screen.
In the case of settings at initial booting, "Monitor mode screen" is displayed.
• There's 0 or more than 2 "Master" units: The number will be displayed.
• "Master" is 0: Press the "ENTER" button to return to the Menu 2 item selection screen.
• "Master" is more than 2: Press the "ENTER" button to return to the screen of step 2.
• "Master" is 0 or more than 2: Press the "MENU" button to return to the Menu 2 item selec-
tion screen.
Number of Master units
DESIGN & TECHNICAL MANUAL
- 40 -
DUCT TYPE
ARHG72-90LHTA
Summary of Contents for GENERAL ARHG72LHTA
Page 5: ...Part 1 INDOOR UNIT DUCT TYPE ARHG72LHTA ARHG90LHTA ...
Page 12: ...4 2 Model ARHG90LHTA I O PCB WLAN adapter Converter etc 8 DUCT TYPE ARHG72 90LHTA ...
Page 57: ...Part 2 OUTDOOR UNIT SINGLE TYPE AOHG72LRLA AOHG90LRLA ...
Page 64: ...5 Wiring diagrams 5 1 Models AOHG72LRLA and AOHG90LRLA 60 OUTDOOR UNIT AOHG72 90LRLA ...
