manualshive.com logo in svg

Fujitsu GENERAL ARHG72LHTA, Design & Technical Manual

Share
Download
Fujitsu GENERAL ARHG72LHTA Design & Technical Manual Download Page 41

12-2. Function settings by using remote controller

Some function settings can be changed on the remote controller. After confirming the setting pro-
cedure and the content of each function setting, select appropriate functions for your installation
environment.

NOTE:

Incorrect settings can cause a product malfunction.

¢

Remote controller address setting

Remote controller address confirmation

NOTE:

The address of this remote controller is set automatically. Do not change the indoor unit
remote controller address from the factory setting "0". (Verify that the address is "0".)

1.

To activate the address setting mode, hold down the three buttons of “MENU”, “<“, and “EN-
TER” at the same time for 2 seconds or longer. Menu 2 setting screen is displayed.

2.

Select the “15” in Menu 2 settings. Then press the “ENTER” button.

3.

The address of this unit is displayed on the screen.

“

” is displayed: 

Address automatically 

Remote controller address 

allocated

Not displayed: 

Address manually 

allocated

01 to 32

Press the “ENTER” button to return to the Menu 2 item selection screen.

- 37 -

DUCT TYPE

ARHG72-90LHTA

Summary of Contents for GENERAL ARHG72LHTA

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands