manualshive.com logo in svg

Fujitsu Fujitsu fi-5950, Operator'S Manual

Share
Download
Fujitsu Fujitsu fi-5950 Operator'S Manual Download Page 5

iii

10. SCANNER SPECIFICATIONS

This chapter lists the scanner specifications.

The “Getting Started” is supplied to this Scanner.
This guide contains necessary information for getting started the scanner, also read the Getting 
Started.

1. PREPARING THE SCANNER

This chapter describes how to prepare the scanner for use.

2. INSTALLATION OF THE SCANNER

This chapter describes how to install and connect the scanner, and how to install the 
scanner application.

We hope that this manual is useful in taking full advantage of the fi-5950 Image Scanner features.

■ 

Regulatory Information

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instruction 
manual, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following 
measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
located.

•

Consult your dealer or an experienced radio/TV technician.

Summary of Contents for Fujitsu fi-5950


































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands