Chapter 6 Troubleshooting
41
The power LED goes off.
Has the scanner been left out of operation for a long time
after being powered on?
Yes
The scanner has entered power saving mode or has been automatically turned off.
z
When the scanner has entered power saving mode
The power LED remains green.
Resume from power saving mode by one of the following methods:
- Press the [Power] or [Scan] button.
Do not press the [Power] button for more than two seconds.
Doing so turns off the scanner.
- Perform scanning from an application.
z
When the scanner has been automatically turned off
The power LED is off.
Turn on the scanner.
"1.3 Turning the Power ON/OFF" (page 15)
No
Does the power LED remains off even if you turn the
scanner off and then on again?
No
The scanner is operating correctly.
Yes
If the problem persists, check the items in
"6.2 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.