Chapter 4 Various Ways to Scan
30
Scanning a Book
1
Open the document cover.
For details, refer to
"1.4 Opening/Closing the Document Cover" (page
2
Remove the document cover by pulling it out in the
direction of the arrow.
3
Place a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
4
In the scanner driver, configure the scan settings for using
the flatbed.
For details, refer to the scanner driver's Help.
4.2 Scanning Documents of Different Types and Sizes
ATTENTION
Take note of the following:
z
A curled or folded document may create a small gap between
the document and the document bed, causing the scanned
image to be blurred.
z
When the document cover is open, light from external sources
such as fluorescent lamps may pass through a document and
affect the brightness of the scanned images. The effect is
stronger for thinner documents. In such cases, close the
document cover before scanning.
Reference point