27
Symptoms
Check point
Action to recover
Papers were not fed
completely. (scanner
stopped feeding)
Is Pick roller dirty?
Follow the procedure described in
section 4.3.3 to clean Pick roller.
Is there any obstacle in
paper path?
Remove obstacles
(Refer to section 4.1)
Check lamp is
blinking
Blinking 7 times
Follow the procedure described in
section 2.2 to release scanner lock.
Blinking 2, 3, 5, 6, 8 times
First, turn off the scanner and PC.
Then power on again to see if Check
lamp is still blinking.
If Check lamp is still blinking,
contact the manufacturer’s authorized
service center or the distributor from
which you purchased your scanner.
* “Double feed” means more than 2 papers are fed at the same time.
