15
3.3 Scanning documents
This section explains how to scan documents.
1) Make sure that the power to the personal computer and the scanner is ON.
2) Check the document condition.
For details, see Section 3.2.1, "Confirming Document Condition."
3) Before setting documents, sufficiently loosen them.
For details, see Section 3.2.2, "Setting Documents."
4) Set the documents on the ADF paper chute.
- The maximum number of papers placed into the ADF is 25.
- Prepare the documents for feeding.
For details, see Section 3.2.2, "Setting Documents."
- Place the side to be scanned facing up.
- Insert the documents into the automatic document feeder until they softly touch
the back of the automatic document feeder. Forcing documents excessively into
the ADF may result in multiple papers feeding simultaneously. Also, make sure
that the ends of the pages are not folded down.
5) Adjust the document guides to the document width. Straighten the documents and
set them into the ADF. If the documents are placed loosely between the left and
right guides, they may be read diagonally.
6) Start scanning from the PC.
7) After scanning completes, take the documents out from the stacker.
