Chapter 1 Preparation
1.1 Connection Preparation
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User’s Guide -Installation-
22
Copyright 2014 FUJITSU LIMITED
P3AM-5502-05ENZ0
•
Connection example with a dedicated remote support port
-
For the ETERNUS DX Disk storage system, three IP addresses are
required (two IP addresses for the MNT ports and one IP address for
the RMT port).
-
An IP address is required for a PC terminal that is used for
maintenance operations performed by a maintenance engineer.
-
Network devices such as LAN switches are required for operation
management.
-
Four enhanced Cat-5 twisted-pair type LAN cables are required (two
for connection to the remote support center and two for connection to
the LAN for operation management).
Figure 1.8
Connection example when the IP address of the Slave CM
is set (and a dedicated remote support port is used)
IP:x.x.x.a
IP:x.x.x.b
Operation is performed with separate LANs for the MNT port and the RMT port.
The IP addresses of both the Master CM and Slave CM are set.
NTP server
Mail server
LAN for operation management
LAN switch
Router
IP:y.y.y.c
IP:x.x.x.d
This PC terminal is used for maintenance operations.
PC terminal used for maintenance
ETERNUS DX Disk storage system
Controller enclosure
RMT
MNT
CM#0
RMT
MNT
CM#1
Remote support
center
Administration
terminal
SNMP
manager
: Enhanced Cat-5 twisted-pair type LAN cables
