manualshive.com logo in svg

Fujitsu ETERNUS AF650 S2, Basic Operation Manual

Share
Download
Fujitsu ETERNUS AF650 S2 Basic Operation Manual Download Page 40

2.3

Using the Setting Change Switches

This section explains how to use the setting change switches of the controller enclosure.
The following settings can be performed by using the setting change switches:

•

Switching the Master CM to the other controller

 

For the two controllers in the ETERNUS AF, the controller through which the ETERNUS AF is set up and
operated is called the "Master CM", while the other controller is called the "Slave CM".

 

•

Restoring the factory default settings (network environment settings and firewall settings) of the LAN ports

•

Restoring the factory default user settings (user account, role, and RADIUS settings)

The operating procedure for the setting change switches is described below.

1

Remove the flange cover and the front cover of the controller enclosure.

Flange cover

Front cover

Chapter 2 Basic Operation
2.3 Using the Setting Change Switches
 

40

FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)

Copyright 2017 FUJITSU LIMITED

P3AG-1932-04ENZ0

Summary of Contents for ETERNUS AF650 S2




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands