System expansions
►
Fasten the slot cover into place with the screw (2).
►
Close the casing (see
"Closing the casing", Page 32
).
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the
BIOS Setup
. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Low-pro
fi
le boards
Low-pro
fi
leboard
You will need to
fi
t a corresponding slot adapter
fi
rst before you can install a
low-pro
fi
le board in a normal board slot.
Two-piece slot covers are
fi
tted to the slots intended for low-pro
fi
le boards. The
two pieces are joined together by a screw.
Do not throw away the slot cover. For cooling, protection against
fi
re and in order to
comply with EMC regulations, you must re
fi
t the slot cover if you remove the board.
EMC,electromagnetic compatibility
►
Remove the required slot cover (see
"Installing and removing a board", Page 35
).
Fitting a slot adapter
2
1
►
Fit the slot adapter to the slot cover of the low-pro
fi
le board (1) and screw tight (2).
Low-pro
fi
le boards,
Now you can install the low-pro
fi
le board in a suitable slot like a normal board
(see
"Installing and removing a board", Page 35
).
38
A26361-K1007-Z220-1-7619, edition 1
Summary of Contents for Esprimo P2 Series
Page 1: ...ESPRIMO P2xxx ESPRIMO P3xxx Operating Manual ...
Page 3: ......