Fujitsu Esprimo P2 Series, Operating Manual, Page: 39 / 61

System expansions
Opening the casing
Casing, Device,
Note that some components on the mainboard may be very hot if the device was in
use shortly before the casing was removed.
These components can be marked with the following symbol.
► Switch the device off. The device must not be in power-saving mode.
Please observe the safety information in "Important notes", Page 3 .
Disconnect the mains plug from the mains outlet.
Only insert the power plug after you have closed the casing.
► Remove any connected wires which are in the way.
► Lay the device on its side in the manner shown below.
1
1
3
2
► For devices with screwed on side part: Remove the casing screws (1).
► Pull the locking device (2) and swivel the side part in the direction of the arrow (3).
A26361-K1007-Z220-1-7619, edition 1 31