Operation
Indicators on the device
Indicators,
Device
The indicators are on the front of the casing. Which indicators are available on your
device depends on the con
fi
guration level you have selected.
1
2 3 4
No.
Indicator
Description
1
Indicator for optional
components, e.g.
multicard reader
The indicator lights up when optional components, e.g. the
multicard reader, are accessed.
Never remove the multicard while the indicator is illuminated.
2
Power-on indicator
Achtung:
When energy saving mode is active, the device must
not be switched off at the main power switch (if present) or
disconnected from the mains, as this may result in data loss.
•
The indicator is illuminated:
The device is switched on.
•
The indicator is
fl
ashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•
The indicator is not illuminated:
The device is switched off.
3
Hard disk indicator
The indicator lights up when the hard disk drive of the device is
accessed.
4
Drive indicator
The indicator lights up when the CD-ROM or DVD drive in the
device is accessed. You must never under any circumstances
remove the CD/DVD while the indicator is lit.
Fujitsu
23
Summary of Contents for ESPRIMO E4 Series
Page 1: ...System Operating Manual ESPRIMO E4xx E5xx ...
Page 3: ......