System expansions
Installing an accessible 3
1
/
2
inch drive (multicard reader) or a
inaccessible 3
1
/
2
inch drive (hard disk)
►
Remove the cover (see chapter
"Removing a cover", Page 33
).
►
Remove the front panel (see chapter
"Removing the front panel", Page 34
).
►
Remove the drive cover if one is
fi
tted. To do this, press the corresponding drive cover
lightly out forwards and pull the drive cover forward out of the front panel.
►
Remove the drive cage (see chapter
"Removing the drive carrier", Page 37
).
►
Turn the drive cage over.
1
2
2
2
►
Slide the drive into the casing (1). Make sure that the screw holes of the
drive cage and of the drive are aligned.
►
Fasten the drive into place with the screws (2).
►
Install the drive cage (see chapter
"Installing the drive cage", Page 38
).
►
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.
►
Secure the front panel on the casing (see chapter
"Securing the front panel", Page 35
).
►
Install the cover on the casing again (see chapter
"Reattaching the cover", Page 36
).
It may be necessary to modify the entry for the drive in the BIOS Setup.
Fujitsu
43
Summary of Contents for ESPRIMO E4 Series
Page 1: ...System Operating Manual ESPRIMO E4xx E5xx ...
Page 3: ......
