System expansions
Removing an accessible 5
1
/
4
inch drive (e.g. DVD drive)
►
Remove the cover (see chapter
"Removing a cover", Page 33
).
►
Remove the front panel (see chapter
"Removing the front panel", Page 34
).
►
Remove the drive cage (see chapter
"Removing the drive carrier", Page 37
).
►
Turn the drive cage over.
2
1
1
1
►
Undo the screws (1).
►
Pull the drive out of the drive cage in the direction of the arrow (2).
►
If necessary, make the required settings on the remaining hard disk drives.
►
If you are not planning to install a new drive, install the corresponding drive cover in
the front panel (if available). To do this, insert the drive cover from behind into the front
panel and press the latches gently into their respective retainers.
►
Install the drive cage (see chapter
"Installing the drive cage", Page 38
).
►
Secure the front panel on the casing (see chapter
"Securing the front panel", Page 35
).
►
Install the cover on the casing again (see chapter
"Reattaching the cover", Page 36
).
It may be necessary to modify the entry for the drive in the BIOS Setup.
40
Fujitsu
Summary of Contents for ESPRIMO E4 Series
Page 1: ...System Operating Manual ESPRIMO E4xx E5xx ...
Page 3: ......
