Fujitsu DynaMO 1300U2 Pocket User Manual Download Page 61

Page: 61 / 70

Please open the key when you format Secure MO disk.

Note

Even if Secure MO disk is reformatted, the password is not deleted.

Select [Tools] - [Format].

The format dialog is displayed. Select the file system in pull down
menu. Enter Volume Label if necessary. Click the [Start] button to
begin formatting.

Note

●

It is possible to format a disk quickly if Quick Format is selected on a disk that has

previously been formatted.

●

NTFS can be selected File system in Windows 2000 or Windows XP. However,

when MO disk is formatted in NTFS, the disk cannot be used with Windows 98 and

Windows Me.

●

The screen is Windows 2000. OS, screen, differ.

A warning message is displayed, click the [OK] button.

Format completion dialog is displayed. Click the [OK] button.

Formatting Secure MO disk

6-2

Summary of Contents for DynaMO 1300U2 Pocket







































































Search results

Summary of Contents for DynaMO 1300U2 Pocket

Reviews:

Related manuals for DynaMO 1300U2 Pocket

Brands by name

Popular brands

Fujitsu DynaMO 1300U2 Pocket, User Manual

Search results

Summary of Contents for DynaMO 1300U2 Pocket

Reviews:

Related manuals for DynaMO 1300U2 Pocket

Brands by name

Popular brands