Fujitsu CELSIUS W410 Operating Manual Download

Page: 56 / 62

System expansions

For cooling, protection against

re, and in order to comply with EMC (electromagnetic

compatibility) regulations, you must re

t the slot cover.

►

Slide the slot cover into the slot (1).

►

Swivel the retaining clamp back again until you feel it click into place (2).

►

Close the casing (see

"Closing the casing", Page 36

If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the

BIOS Setup

. If necessary, change the settings. Further

information is provided in the PCI board documentation.

Installing and removing heat sinks

Removing the heat sink

The shape and position of the heat sink are device-dependent.

►

Open the casing (see

"Opening the casing", Page 35

►

Disconnect the cable of the fan (FAN1) from the mainboard.

►

Undo the screws on the heat sink.

►

Lift the heat sink out of the casing.

You can now replace the processor.

Never operate the device without a heat sink! Before initial startup, install the heat
sink again in the same way as it was installed in the device before removal.

Fujitsu Technology Solutions

Summary of Contents for CELSIUS W410































































Search results

Summary of Contents for CELSIUS W410

Reviews:

Related manuals for CELSIUS W410

Brands by name

Popular brands

Fujitsu CELSIUS W410, Operating Manual

Search results

Summary of Contents for CELSIUS W410

Reviews:

Related manuals for CELSIUS W410

Brands by name

Popular brands