System expansions
It may be necessary to modify the entry for the drive in the
BIOS Setup
.
Installing/removing the SmartCard reader and/or
WLAN module (optional, 3½-Zoll)
You can also install a SmartCard reader and/or a WLAN module for wireless LAN (Local Area
Network) or a memory card reader in the drive bays for 3½ inch drives (see
"Removing and
installing the memory card reader (optional, 3½ inch, MultiCard)", Page 44
).
The SmartCard reader and WLAN module can be installed together in one
module holder (optional). If you have ordered a device with a WLAN module
and SmartCard reader, the module holder, SmartCard reader and WLAN
module will already be installed at the time of delivery.
However, you can only install one of the two boards. The WLAN module is installed
in the lower slot of the carrier and the SmartCard reader in the upper slot of the
carrier. If you want to install the SmartCard reader and the WLAN module together,
fi
rst install the WLAN module. Removal is performed in the reverse order.
If you have ordered a device without a WLAN module or SmartCard reader,
a blind cover is installed instead of the module holder.
Removing the module holder
►
Open the casing (see
"Opening the casing", Page 35
).
►
Disconnect the cables connected to the module holder.
11
2
►
Remove the screws (1) on the module holder.
►
Slide the module holder out of the casing in the direction of the arrow (2).
40
Fujitsu Technology Solutions
Summary of Contents for CELSIUS W410
Page 1: ...System Operating Manual CELSIUS W410 ...
Page 3: ......
