Fujitsu CELSIUS W410, Operating Manual

Page: 35 / 62

Troubleshooting and tips
No mouse pointer displayed on the screen
Cause Remedy
The mouse is not correctly connected. ► Shut down the operating system properly.
► Switch the device off.
► Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.
► Make sure that only one mouse is
connected.
► Switch the device on.
The mouse controller is not enabled.
► Check in the BIOS-Setup whether the mouse
controller is enabled .
► Check that the mouse driver is properly
installed and is present when the application
programme is started. Detailed information
can be found in the user guide for the mouse
and application programme.
Time and/or date is not correct
Cause Remedy
Time and date are incorrect. ► Set the correct time and date within the
operating system you are using.
or
► Set the correct time and/or date in the
BIOS Setup .
The lithium battery is discharged. ► If the time and date are repeatedly wrong
when you switch on your device, replace the
lithium battery (see
"Exchanging the lithium
battery", Page 54 ).
Error messages on the screen
Error messages and their explanations are provided:
• in the technical manual for the mainboard
• in the documentation for the programs used
Fujitsu Technology Solutions 31