Fujitsu CELSIUS C620 Operation Manual Download Page 38 | Manualshive

Page: 38 / 106

background image

Performing system configuration

38

Fujitsu Technology Solutions

Systems without a pre-installed operating system

Install the operating system

Configure the device and install the desired operating system and the desired applications.

►

Switch the device on.

►

Install the operating system.

►

During installation, follow the on-screen instructions.

►

Install the latest driver and updates from the "Drivers & Utilities" DVD.

i

You will find more information on the system, as well as drivers, utilities and updates on
the "Drivers & Utilities" DVD and on the Internet at

http://ts.fujitsu.com/support

.

Systems with a pre-installed operating system

Depending on version, your device can be delivered with an operating system already pre-installed.

!

Once the installation has been started the device must NOT be switched off, unless the
installation has been completed!
During the installation process, DO NOT restart the device unless you are requested to do
so!
Otherwise the installation will not be carried out correctly and the contents of the hard disk
will have to be completely restored.

i

If the device will be included in a network, the user, device and network protocol details
are required during the software installation.
Contact your network administrator if you have any questions about this information.
When you switch on the device for the first time, the supplied software is installed and
configured. Plan a reasonable amount of time for this, as this process must not be
interrupted.
You may need the licence number for Windows during the installation. The licence number
is located on a sticker on your device.

i

You will find more information on the system, as well as drivers, utilities and updates on
the "Drivers & Utilities" DVD and on the Internet at

http://ts.fujitsu.com/support

.

«
...
36
37
38
39
40
...
»

Summary of Contents for CELSIUS C620











































































































Reviews:

No comments

Related manuals for CELSIUS C620

Brand: Advantech Pages: 50

Brand: UCOM Pages: 3

Brand: Radio Shack Pages: 408

Brand: Neousys Technology Pages: 73

Brand: Prentke Romich Company Pages: 36

Brand: Aaeon Pages: 55

TOUGHBOOK CF-19FHGAX M Series

Brand: Panasonic Pages: 90

Brand: Wincor Nixdorf Pages: 32

Brand: Nexcom Pages: 25

Brand: Nexcom Pages: 78

Brand: Nexcom Pages: 92

NISE 3500M Series

Brand: Nexcom Pages: 120

Brand: QNAP Pages: 45

Brand: Cybernet Pages: 40

Brand: Elster Instromet Pages: 89

Brand: Rockwell Automation Pages: 124

Brand: Shuttle Pages: 29

Brand: AMSTRAD Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands