Fujitsu CELSIUS C620 Operation Manual Download Page 15 | Manualshive

Page: 15 / 106

Fujitsu CELSIUS C620 Operation Manual Download Page 15

Important notes

Fujitsu Technology Solutions

15

Important notes

For your safety

This manual contains important information about the safe and proper use of this product.

►

Read the manual through carefully before using this product.

►

In doing so, pay special attention to the supplied "Safety/Regulations" manual.

►

Before using the product, familiarise yourself with the safety instructions contained there.

►

Keep this manual and the "Safety/Regulations" manual available so that you can refer to them
at any time while using the product.

Radio interference

!

This is a Class A device. This device may cause radio interference in residential areas. In
this case, the operator can be requested to take appropriate measures.

Safety notes

!

Please follow the safety instructions given in the "Safety/Regulations" manual and the
safety instructions below.
While installing and operating the device, please observe the instructions on
environmental conditions in the "Technical data" section and the "Preparation for initial
startup" section.
ON/OFF switches do not disconnect the device from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.

Transporting the device

!

Transport all parts separately in their original packaging or in a packaging which protects
them from knocks and jolts. Do not unpack them until at the place where they are to be set
up.
Ask other people to help you carry the device.
Never lift or carry the device using the ears on the front panel

«
...
13
14
15
16
17
...
»

Summary of Contents for CELSIUS C620











































































































Reviews:

No comments