![Fujitsu Arrows Tab F-02F Instruction Manual Download Page 84](http://html.mh-extra.com/html/fujitsu/arrows-tab-f-02f/arrows-tab-f-02f_instruction-manual_121671084.webp)
Applications
82
◆
Recording a program
You can record image, sound, subtitle and data broadcasting
you are watching and save on a microSD card.
・
Even when TV mode switches to 1Seg while recording in
Full Seg, recording mode does not switch to 1Seg It is the
same as when switching to Full Seg while recording in 1Seg.
・
Up to 99 items can be recorded for 1Seg or Full Seg.
1
On the TV watching screen, slide
to the
left to start recording
・
On the TV watching screen
→
P79
2
Slide
right to end recording
✔
INFORMATION
・
Use a microSD card formatted on the terminal in advance.
・
For a Full Seg program, 20% or more remaining battery and
150 MB or more memory space on the microSD card, and for
a 1Seg program, 20% or more battery and 10 MB or more for
memory space are required to start recording.
・
If the following occurs while recording, recording
automatically stops.
- The available memory of the microSD card becomes 5 MB
or less for Full Seg, 2 MB or less for 1Seg
- Remaining battery is 10% or less
- 6 hours have elapsed since the recording started
・
Full Seg programs recorded by the terminal can be played
only on the terminal.
・
When playing programs saved in the microSDHC card, image
or audio may be interrupted. For recording, you are
recommended to use microSDXC card. (http://
www.fmworld.net/product/phone/microsdxc/).
・
When "
長時間モード
(Long play mode)" in
設定
(Settings) is
enabled, watching/recording in Full Seg is not available. To
reserve recording in Full Seg, disable "
長時間モード
(Long
play mode)" before starting the recording.
・
Recorded TV programs are saved as copyrighted data. It
cannot be attached to mail.
・
You cannot stop recording when recording time is extremely
short (10 seconds or less).
・
Record programs in a place where airwave condition is
stable. A program may not be recorded in a place where the
reception condition is unstable.
・
While recording, you cannot change channel.
・
While you use heavy load functions such as recording and
MTP transmission at the same time, the recording may not be
performed normally.
・
If you use data communication services while recording, the
recording may not be performed normally because TV signal
condition becomes poor.
・
If you record a paid broadcast, copy-controlled program or
when you move to a different broadcast area, recording may
end halfway.