Fujitsu AG * V12LAC Series, Service Instruction

Page: 87 / 89

FLOOR TYPE HALF CONCEALED KIT: UTR-STA
INSTALLATION MANUAL
(PART No. 9316532014)
●
Be careful not to scratch the air conditioner when handling it.
●
After installation, explain correct operation to the customer, using the operating manual.
●
Let the customer keep this installation manual because it is used when the air conditioner is serviced or moved.
STANDARD ACCESSORIES
The following installation accessories are supplied.
Use them as required.
Name and Shape Q’ty
Insulation Seal
1
1. SELECTING THE MOUNTING POSITION
Fig. 1
Decide the mounting position with the customer as follows:
(1) Install the indoor unit level on a strong wall which is
not subject to vibration.
(2) The inlet and outlet ports should not be obstructed:
the air should be able to blow all over the room.
(3) Install the unit near an electric outlet or special branch
circuit.
(4) Do not install the unit where it will be exposed to direct
sunlight.
(5) Install the unit where connection to the outdoor unit it
easy.
(6) Install the unit where the drainpipe can be easily
installed.
(7) Take servicing, etc. into the unit where the filter can be
removed in Fig1. Also install the unit where the filter
can be removed.
(8) Install the place where is no gap around the unit.
2. WALL HOLE
Fig. 2
Drill a wall hole of the size shown in the Fig.2.
WARNING
Do not make a hole that is
deeper than 80mm. The prod-
uct cannot be maintained.
Indoor unit
Wall
10 cm or over
8 cm or over
5 cm or over
8 cm or over
75 ~ 80 mm
730 ~ 735 mm
590 ~ 595 mm
Putting out clearance of unit