03-04
Auto restart
T
Please do not change to AUTO RESTART "01" when you want to manage it centrally.
he following settings are also possible, depending on the operating conditions.
Indoor room temperature sensor switching function
(Only for Wired remote controller)
The following settings are needed when use the control by Wired remote controller temperature sensor.
( Factory setting)
Setting Description
Function Number
Setting Value
Yes
No
40
00
01
( Factory setting)
Setting Description
Function Number
Setting Value
No
Yes
42
00
01
If setting value is “00”,
room temperature is controlled by the indoor unit temperature sensor.
If setting value is “01”,
room temperature is controlled by either indoor unit temperature sensor or remote control unit sensor.
Remote controller signal code
Change the indoor unit Signal Code, depending on the remote controllers.
( Factory setting)
Setting Description
Function Number
Setting Value
A
B
C
D
44
00
01
02
03
External input control
"Operation/Stop" mode or "Forced stop" mode can be selected.
( Factory setting)
Setting Description
Function Number
Setting Value
Operation /Stop mode
(Setting forbidden)
Forced stop mode
46
00
01
02
Setting Description
Function Number
Setting Value
Standard
Slightly warmer control
Lower control
Warmar control
31
00
01
02
03
( Factory setting)
Heater room temperature correction
Depending on the installed environment, the room temperature sensor may require a correction.
The settings may be changed as shown in the table below.
When using floor console installation, change the setting value to “01”.
Setting Description
Function Number
Setting Value
Standard
Slightly lower control
Lower control
Warmar control
30
00
01
02
03
( Factory setting)
Cooler room temperature correction
Depending on the insralled environment, the room temperature sensor may require a correction.
The settings may be selected as shown in the table below.
