2-1. VERTICAL LOUVER CONTROL
Each time the button is pressed, the air direction range will change as follows:
Use the air direction adjustments within the ranges shown above.
The vertical airflow direction is set automatically as shown, in accordance with the type of operation selected.
Cooling / Dry / Fan mode Horizontal flow
Heating mode
Downward flow
(Function Range)
(Fig 8 : Air Direction Range)
(Operation Range)
2-2. SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
The range of swing depends on the set airflow direction.
When the indoor fan is either at S-Low or Stop mode, the swinging operation is interrupted
and the louver stops at the memorized position.
( Stop mode means Operation stop.)
During Cooling / Heating / Dry / Fan mode :
During Auto mode operation, for the first minute after start-up, air -flow will be horizontal
; the air direction cannot be adjusted during this period.
The type of operation
Cooling / Dry
Range of swing
to
Heating
to
2. For Ceiling Type < AB *G30LRTE/ 36/ 45LRTE >
1
2
3
4
5
1
2
3
4
5
5
1
1
1
5
4
3
to 5
5
4
1
During Heating start-up and Defrost operation, to prevent the thing that
the cool air blows to the person directly, the louver is set to .
During Cooling and Dry operation, if the Vertical Louvers are left in the to ,
3
3
they will automatically return to position .
<Operation continues for 30 minutes>
<Operation stops within 30 minutes>
they will automatically return to position in next Cooling start-up.
For the dew condensation prevention of the Vertical Louvers.
Fan
01-12
