manualshive.com logo in svg

Fujitsu 770Tx, User Manual

Introducing the Fujitsu 770Tx user manual, a comprehensive guide packed with detailed instructions, tips, and troubleshooting advice. Easily download this essential manual for free on our website, ensuring you have all the information you need to maximize the potential of your Fujitsu 770Tx device.

Share
Download
background image

S e c t i o n   T w o

50

P O I N T

For optimum speakerphone performance: 

■

Speak clearly.

■

Limit background noise.

■

Speak facing the keyboard from about
one (1) foot away.

McAfee VirusScan

Running your McAfee VirusScan program after
loading data or programs from a floppy disk,
CD-ROM,modem data transfer, or infrared
data transfer is a precaution that will protect
the data on your hard dr ive from contamina-
tion or destruction. See your VirusScan online
help screens for information on how and when
to run this program.

AGATÉ TIOMAN PRO-SWAP

Tioman allows you to warm-swap your
Lifebook 700 Series peripheral devices in
the Multi-function bays of your notebook.
Tioman will put the system into suspend
mode permitting the swapping of a device.
After resuming the system,the new device
is automatically detected.

Tioman supports warm-swapping of the 
following devices:

■

Optional Second 3.2GB hard drive.

■

3.5" floppy disk drive.

■

Optional Zip drive.

■

20-speed maximum CD-ROM drive.

■

Lithium ion Battery.

Using Tioman

Tioman allows you to exchange removable
devices without restarting the system by
putting the system in suspend mode before
you swap the device. Press the resume button
and the system will automatically detect the

new device. The software will automatically
create drive letter(s) and list the dr ive under
‘My Computer’and ‘Windows Explorer’. The
taskbar icon and the ToolTip balloon will be
updated to reflect the current device inserted
in the bay.

Device

ToolTip balloon

Second HDD

Hard drive in bay

(Multi-function Bay 2 only)

FDD

Diskette drive in bay

Zip drive

Removable drive in bay

CD-ROM

CD-ROM drive in bay

(Multi-function Bay 2 only)

Battery

No device in bay

Tioman Taskbar Icon

Once the Tioman software in installed on your
system and Windows 95 is running, small icons
are displayed in the lower right hand corner of
the taskbar. The left icon corresponds to Multi-
function Bay 1 and the right icon to Multi-
function Bay 2. The taskbar icons are your 
gateway into the capabilities of Tioman.

Summary of Contents for 770Tx










































































































































































































Reviews:

No comments

Related manuals for 770Tx

Gateway 3100 Series Specifications preview
3100 Series
Brand: Gateway Pages: 7
Panasonic CF-45 Series Operating Instructions Manual preview
CF-45 Series
Brand: Panasonic Pages: 32
Panasonic CF-30 Series Operating Instructions Manual preview
CF-30 Series
Brand: Panasonic Pages: 40
Panasonic CF-25 Operation Instructions Manual preview
CF-25
Brand: Panasonic Pages: 46
Gateway P-6831 Reference Manual preview
P-6831
Brand: Gateway Pages: 168
Gateway Solo 1400 Replacement Manual preview
Solo 1400
Brand: Gateway Pages: 12
Acer Aspire M3-581T Service Manual preview
Aspire M3-581T
Brand: Acer Pages: 234
Panasonic Toughbook CF-50Y8KNUDM User Manual preview
Toughbook CF-50Y8KNUDM
Brand: Panasonic Pages: 40
Dell Inspiron 14 5420 Service Manual preview
Inspiron 14 5420
Brand: Dell Pages: 68
Dell Latitude 5495 Owner'S Manual preview
Latitude 5495
Brand: Dell Pages: 93
Dell Latitude 7200 2-in-1 Quick Start Manual preview
Latitude 7200 2-in-1
Brand: Dell Pages: 18
Samsung NP-N110-12PBK Specifications preview
NP-N110-12PBK
Brand: Samsung Pages: 2
Samsung NP-N310 Specifications preview
NP-N310
Brand: Samsung Pages: 2
Samsung NP-N145-JP02US Brochure & Specs preview
NP-N145-JP02US
Brand: Samsung Pages: 4
Samsung NC10 Series Specifications preview
NC10 Series
Brand: Samsung Pages: 2
Samsung N145 Plus Brochure & Specs preview
N145 Plus
Brand: Samsung Pages: 2
Samsung NP-350U2Y User Manual preview
NP-350U2Y
Brand: Samsung Pages: 83
Samsung NA10 User Manual preview
NA10
Brand: Samsung Pages: 74

Brands by name

Popular brands

Load more brands