CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
7.1 Online setup
7.2 Double-feed detection
7.3 Setting of Page Edge Filler
7.4 Setting dropout color
7.5 Setting of pre-pick mode
7.6 Resetting the consumables counters
7.7 Adjusting the offset
7.8 Adjust the magnification
7.9 Power saving
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
7.1 Online setup
"Software Operation Panel" is an application program that is installed with driver software (TWAIN/ISIS). This software allows you to
configure various settings for fi-5650C with user-friendly interfaces. To start this application, select [All Programs] - [Scanner Utility for
Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel]. Details of settings are as follows:
No
Function
Description
Settings
Default
1
Double feed
Specifies double feed
detection method. The
scanner monitors
differences in document
length, overlapping or
both, for detecting double-
feeds.
None / Check Overlapping / Check Length / Check overlapping
and length For setting the length difference detection, select 15 /
10 / 20mm
None
2
Page Edge Filler
Specifies area to be
erased from image
margins when scanning
documents.
Top/Bottom/Right/Left:
set the value from 0 to 15mm
(can be changed by 1mm)
(A: Image output area
B: Page Edge Filler area)
Top/Bottom/Right/
Left: 0mm
1 |
2
All Rights Reserved, Copyright (C) PFU LIMITED 2004