Operating the Pocket PC
18
A26391-K151-Z120-1-7619, edition 5
First data synchronisation between the Pocket PC and the
PC/notebook
After you have specified the desired and required settings for synchronisation in the ActiveSync
Setup Wizard, the first synchronisation starts automatically.
Switching Pocket PC off and on
Switch the Pocket PC on or off with the Suspend/Resume button. After certain applications or the
installation of new programs, it may be necessary to restart the Pocket PC with the soft reset. It is
only necessary in seldom, exceptional cases to reset the Pocket PC to the delivered state.
These three options for switching the Pocket PC off and on are explained in the following sections:
●
Switching Pocket PC off and on during normal use
●
Switching Pocket PC off and on with Soft Reset function
●
Resetting Pocket PC to delivered state
Switching Pocket PC off and on during normal use
Switching off with Suspend/Resume button
►
Briefly press the Suspend/Resume button to switch off the Pocket PC.
The Pocket PC is switched to suspend mode.
i
If you have specified a switch-off time with the system settings, your Pocket PC will
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with Suspend/Resume button
►
Briefly press the Suspend/Resume button to switch on the Pocket PC.
The application you were working on before you switched off the Pocket PC with the
Suspend/Resume button appears on the screen. The Today screen appears if you switch on your
Pocket PC again with the Suspend/Resume button after more than four hours.
Switching on with application buttons
By default, you can also switch your Pocket PC on by briefly pressing one of the application buttons.
The applications assigned to the respective button appears on the screen.
i
By making the appropriate setting in
FSC KeyLock
(see chapter "Configuring the Pocket
PC"), you can also prevent the Pocket PC from being switched on when an application
button is pressed.
