Operating the Pocket PC
A26391-K151-Z120-1-7619, edition 5
25
Inserting and removing expansion cards
Two slots allow the operation of different expansion cards in your Pocket PC. Possible expansion
cards include memory cards (Type I or II CompactFlash cards and SD/MMC cards), GPS cards,
GSM/GPRS CompactFlash cards and LAN cards.
!
Only use expansion cards suitable for your Pocket PC.
Observe the manufacturer's instructions when using the expansion cards.
Never use force when inserting or removing an expansion card.
Make sure that no foreign matter gets into the slots.
Inserting and removing SD/MMC cards
A slot is suitable for a memory card of the type "Secure Digital I/O" (SD card) or "MultiMediaCard"
(MMC card).
2
1
3
►
Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot
somewhat.
►
Pull the placeholder out of the Pocket PC (2).
►
Carefully push the memory card (3) into the slot.
The memory card can protrude by one to several millimetres (depending on the type of card used).
i
Keep the placeholder in a safe place. When you remove the memory card again, you
should refit the placeholder. This prevents foreign matter from getting into the slot.
