AL-MEISTER ALM3222 Instruction Manual <Rev.2>
Page
30
of
63
4. SET LAMINATION FILM/MANUAL MODE (cont’d)
20. Hold the film vertically about 2 inches from the cut side. Look at the film from the side.
•If the curl is less than 1/2'' from the vertical plane, there is no
need to adjust.
•If the curl is more than 1/2" to the lower side, tighten the two
upper tension controllers with half turn.
•If the curl is more than 1/2" to the upper side, loosen the two
upper tension controllers with half turn.
1
.
9
7
i
n
Within 1/2 inch
1/2inches
Upper side
Lower side
Over 1/2 inch
Lower side
Over 1/2 in.
Upper side
