-19-
Removing the Oven Door
For
easier
cleanups
,
the
oven
door
can
be
removed
.
1
.
Open
the
oven
door
fully
as
shown
in
the
figure
below
.
2
.
Lift
up
and
turn
the
small
levers
B
located
on
the
two
hinges
.
3
.
Grip
the
door
on
the
two
outer
sides
and
close
it
approximately
half
way
.
4
.
Pull
the
door
towards
you
lifting
it
out
of
the
hinge
slot
.
To
replace
the
door
,
ensure
the
seat
D
is
hooked
perfectly
onto
the
edge
of
the
hinge
slot
,
and
then
reverse
the
above
mentioned
sequence
.
Stainless
Steel
Front
Panel
Use a soft, not abrasive cloth with warm soapy water to clean the control
panel and door panel of the oven. Dry the stainless steel surfaces with a
soft dry cloth.
Use non-scratch cleaning agents to clean the stainless steel surface and
always clean by following the grain direction.
WARNING! Do not use harsh chemicals, harsh cleaning agents or
any abrasive material on the control panel. Doing so may remove
the indicator markings which will not be covered by warranty.
WARNING! Do not use the steam cleaner, the warranty will not
cover the damage by the steam cleaner.
WARNING! Do not use the cleaning agents which contains soda,
acid, or chlorinum.
WARNING! Do not use cleaning sprayer, harsh abrasive cleaner or
sharp metal scrapers to clean the oven, the harsh cleaners may
scratch the surface.
